How To Make A Nightstand With Drawers

This 3 drawer nightstand can be made using common wood and easy joinery. Here is the link to grab the details of the makeover with easy steps and instructions dododsondesigns.

How To Build A Side Table With Storage Addicted 2 Diy

Build the drawer and compartment using wood glue and finish nails.

How to make a nightstand with drawers. How to build a DIY Nightstand with 3 drawers using FREE plans. Make two of these. This part is where its especially important to get each side as square as possible otherwise youll end up with a wobbly nightstand.

Once all the holes are made for the tenon stock use wood glue and tenon stock to assemble the frame of the nightstand. First in order for our drawer slides to attach to the inside of our nightstand we had to add wood along the inside sides so there was a flush wood surface to mount the slides. Screw 12 plywood or 12 wood boards we used these 12 boards 13 to both inside sides on the nightstand right above the bottom 22 13.

The tenon stock fit in very tightly and make a strong bond. Not only does this nightstand DIY feature tons of storage space and a beautiful weathered gray stain but its also got a secret charging station in the top drawer and a pull-out writing tray. This is a link to a Google 3D SketchUp drawing for a two drawer night stand.

This easy to build simple modern style nightstand makes a great addition to any bedroom suite. Measure and cut the side trim pieces to size and attach them to the sides of the shelf with 1 pin nails and wood glue. Measure and cut the front and back trim pieces to size and attach them the same way.

Screw a 12 onto the top and bottom of the boards with 1 14 screws. Cut the shelf pieces to size. Most drawings do not have instructions its assumed you can build it based on the completed drawing provided.

Attach left and right cabinet sides of drawer slides to the nightstand. You will need the SketchUp software to download this drawing and its freely available online. With plenty of storage in the large drawers it can even repl.

Next glue one of the sides and screw on your 26 14 22s. How to make the nightstand Step 1. We do not provide support for this software.

Just sand your old nightstand then paint and add that glittery effect on the drawer edges and the legs and the nightstand is just ready to rock your home decor. How to Build a Nightstand with Drawers Building the Shelves Step 1. Get the tutorial at The House of Wood.

Sandwich the four 18 ¼-inch back boards between the two frames with two of the back boards above the bottom. Weekend project goals. Clamp and let dry overnight.

Line the slides up with the front of the box and then extend them to their full length. Make cuts and prep boards. Position the two side frames parallel to each other with the sideboards facing inward.

Top and Bottom Shelves. The easiest way to install drawer slides in a nightstand is to place a piece of long 14 plywood inside the box on each side then put the drawer slides on top of the plywood. Make all the cuts in the 15 boards according to the cut list.

Repeat with all 4 sides. Decide how the boards will be laid out and drill pocket holes on one side of the end boards. Sand all the boards and remove any sanding dust.

Diy Modern Nightstand How To Build It In 6 Easy Steps